Spectrophotometric quantification of lactic bacteria in alginate and control of cell release with chitosan coating

Lactococcus lactis ssp. cremoris was entrapped within a Ca-alginate matrix, and an in situ spectrophotometric method for monitoring cell population in calcium alginate beads described. The intracapsular cell population can be estimated by measuring the optical density of beads containing cells, using cell-free beads as reference, or by measuring absorbance of a liquified bead suspension. Alginate beads, and beads coated with chitosan type I, II, and I and II mixtures, were examined for cell release. Lower viscosity chitosan (type I) coatings reduced cell release by a factor of 100 from10⁵ cfu ml⁻¹ to 10³ cfu ml⁻¹ after 6 h of fermentation. Reuse of chitosan I coated alginate beads also showed a reduction in cell release by a factor of 100. Cell loading and initial cell growth within the beads greatly affected cell release. Reducing the initial cell release would lower the overall levels of cell release throughout the fermentation. Compared to non-immobilized cultures, a 20–40% reduction in the lactic acid production rate was observed for alginate beads and chitosan I coated alginate beads, respectively. This reduction can be compensated for by increasing the intracapsular cell loading during immobilization, or before the onset of fermentation.     

Mutational analysis of slyD, an Escherichia coli gene encoding a protein of the FKBP immunophilin family

slyD encodes a 196 amino acid polypeptide that is a member of the FKBP family of cis–trans peptidyl–prolyl isomerases (PPIases). slyD mutations affect plaque formation by the phage φX174 by blocking the action of the phage lysis protein E. Here we describe the selection of a set of spontaneous slyD mutations conferring resistance to the expression of gene E from a plasmid. These mutations occur disproportionately in residues of SlyD that, based on the structure of the prototype mammalian FKBP12, make ligand contacts with immunosuppressing drug molecules or are conserved in other FKBP proteins. A wide variation in the plating efficiency of φX174 on these E  ^R strains is observed, relative to the parental, indicating that these alleles differ widely in residual SlyD activity. Moreover, it is found that slyD mutations cause significant growth rate defects in Escherichia coli B and C backgrounds. Finally, overexpression of slyD causes filamentation of the host. Thus, among the FKBP genes found in organisms across the evolutionary spectrum, slyD is unique in having three distinct drug-independent phenotypes.     

Activation of formylmethanofuran synthesis in cell extracts of Methanobacterium thermoautotrophicum.

In cell extracts of Methanobacterium thermoautotrophicum, formylmethanofuran (formyl-MFR) synthesis (an essential CO2 fixation reaction that is an early step in CO2 reduction to methane) is subject to a complex activation that involves a heterodisulfide of coenzyme M and N-(7-mercaptoheptanoyl)threonine O3-phosphate (CoM-S-S-HTP). In this paper we report that titanium(III) citrate, a low-potential reducing agent, stimulated CO2 reduction to methane and activated formyl-MFR synthesis in cell extracts. Titanium(III) citrate functioned as the sole source of electrons for formyl-MFR synthesis and enabled this reaction to occur independently of CoM-S-S-HTP. In addition, CoM-S-S-HTP was found to activate an unknown electron carrier that reduced metronidazole. The activation of formyl-MFR synthesis by CoM-S-S-HTP may involve the activation of a low-potential electron carrier.     

Eosinophils preferentially use bromide to generate halogenating agents

Human eosinophils preferentially utilize bromide to generate a brominating agent, even at physiological halide concentrations, where chloride (140 mM) is over 1000-fold greater than bromide (20-100 microM). Under the same conditions, neutrophils use chloride to generate a chlorinating agent. The total amount of active halogen trapped by 1,3,5-trimethoxybenzene from eosinophils increases by over 2-fold as the added bromide concentration increases from 0 to 100 microM, with approximately 40 nmol of halogen trapped per million cells at the highest bromide level. At least 25-35% of the oxygen consumed by stimulated eosinophils is directed toward the generation of halogenating species. Since the relative halogenating behavior of eosinophil peroxidase and neutrophil myeloperoxidase in this bromide range is essentially identical to that of the cells, the specificity of eosinophils toward bromide is intrinsic to eosinophil peroxidase and not to any special cellular properties. These results suggest that human eosinophils use bromide in vivo and that a deficiency of bromide may influence their ability to produce halogenating agents.     

Uracil-DNA glycosylase in insects. Drosophila and the locust

It has been reported that Drosophila lacks a uracil-DNA glycosylase but that a direct incising activity on uracil-containing DNA appeared developmentally only in third instar larvae. In contrast we have found by two independent assays, that uracil-DNA glycosylase exists in both Drosophila eggs as well as in third instar larvae. The first assay shows the liberation of [3H] uracil from a d(AT)n polymer randomly substituted with [3H]uracil by its synthesis in the presence of [3H] dUTP. The second fluorometric assay for uracil-DNA glycosylase depends on the unique topological properties of circular DNAs and has the advantage of detecting apyrimidinic/apurinic (AP) endonuclease activity as well. To test one other insect, locust eggs were also assayed for uracil-DNA glycosylase. The amount of uracil-DNA glycosylase correlated well with the amount of DNA in actively replicating cells.     

Reproductive characteristics that favor invasiveness in Leonotis nepetifolia (L.) R. Br.

Reproductive systems are life attributes important in defining the demography and genetic constitution of invasive alien species populations. We describe the phenology, floral behavior and floral visitors in Mexican populations of Leonotis nepetifolia considered invasive in America, Asia and Oceania. The mating system was determined through pollination experiments and, with a morphological analysis of flowers (outcrossing index, OCI) and pollen/ovule ratio, the breeding system was evaluated. Germination of 1 and 2-year-old seeds was tested to assess the potential characteristics of germination. Leonotis nepetifolia was reproductive for 7 months (June to December) and tended towards a specific season during autumn. Anthesis lasted 36 hr with protogyny and no hercogamy, with floral visitors of Apodiformes, Hymenoptera, Lepidoptera and Thysanoptera. Pollination experiments indicated a mixed mating system, whereas the OCI and the pollen/ovule ratio pointed towards a facultative xenogamous breeding system. Seed production was high (1,445 ± 132 seeds/plant); the seeds had potential longevity and were neutral photoblastic. One-year-old seeds germinated slightly later ( = 2.6 ± 0.11 days) than 2-year-old seeds ( = 1.9 ± 0.02 days), both synchronously (IS_1yr = 0.88 ± 0.03 and IS_2yr = 0.82 ± 0.02). Germination percentage for 1-year-old seeds was lower (55.33 ± 4.40%) than that of 2-year-old seeds (94.18 ± 0.59%), suggesting a potential longevity of the seeds in an optimal environment. Reproductive characteristics, such as wide reproductive period, mixed breeding system, copious seed production, seeds with potential longevity, and quick and synchronic germination in different light conditions, favor the invasive capacity of Leonotis nepetifolia.     

Medical Materials Based on Chitosan Succinamide–Glycerol Systems

The conditions to obtain materials with elastic-viscous properties based on chitosan succinamide have been studied. A decreased polymer content and a transition from visco-elastic liquids to elastic-viscous systems were shown upon the addition of glycerol to an aqueous solution of chitosan succinamide. The systemic response, biological compatibility, and dynamics of bioresorbability of the obtained materials were studied during implantation in laboratory animals.